Коды ошибок

  1. 2724 ATC subarm position
  2. 2725 RS tool L/M unfit
  3. 2726 Magazine encoder read
  4. 2727 Magazine turn condition
  5. 2728 Magazine tool number
  6. 2730 Tool insert disable
  7. 2731 Turret rotation
  8. 2850 Program external request impossible
  9. 2851 Machine change M-code
  10. 2852 Hand open/close interlock
  11. 2900 DIRECTION V variable
  12. 2901 DIRECTION check address
  13. 2902 DIRECTION data operation
  14. 2903 DIRECTION use of character
  15. 2904 DIRECTION numerical data
  16. 2905 DIRECTION parameter/point
  17. 2906 DIRECTION register
  18. 2907 DIRECTION F
  19. 2908 DIRECTION E
  20. 2909 DIRECTION sequence number
  21. 2910 UNUSABLE G-code
  22. 2911 UNUSABLE M-code
  23. 2912 UNUSABLE address character
  24. 2913 UNUSABLE mnemonic
  25. 2914 UNUSABLE direction of left part
  26. 2915 EXPRESSION calculation
  27. 2916 EXPRESSION syntax
  28. 2917 EXPRESSION right part
  29. 2918 EXPRESSION left part
  30. 2919 EXPRESSION buffer over
  31. 2920 VARIABLE buffer over
  32. 2921 PROGRAM DIRECT program name
  33. 2922 PROGRAM DIRECT V variable
  34. 2923 PROGRAM DIRECT use of character
  35. 2924 PROGRAM DIRECT G-code
  36. 2925 BRANCH sequence name
  37. 2926 BRANCH condition
  38. 2927 Parameter setting illegal
  39. 2928 Parameter playback impossible
  40. 2929 Register set impossible
  41. 2930 Program plus var. limit over
  42. 2931 Program minus var. limit over
  43. 2932 Program request illegal
  44. 2933 Program request impossible
  45. 2934 Program external request impossible
  46. 2935 Program is not select
  47. 2937 Program end code
  48. 2938 Program analysis finish
  49. 2939 SUB PROGRAM stack
  50. 2940 SUBPROGRAM program name
  51. 2941 SUB PROGRAM buffer over
  52. 2942 Direction impossible on running
  53. 2943 Data file read
  54. 2944 Comment end code not found
  55. 2945 Equal is not exist
  56. 2946 No spec.
  57. 2948 DIRECTION Y
  58. 2949 DIRECTION Z
  59. 2950 DIRECTION D
  60. 2951 DIRECTION L
  61. 2952 DIRECTION SU
  62. 2953 DIRECTION torque limit
  63. 2954 PROGRAM DIRECT M-code
  64. 2955 PROGRAM DIRECT equal
  65. 2956 Machine change M-code

<< Назад 1 2 3 4 5 Вперед >>
 

Программирование станков с ЧПУ Okuma OSP-U100L, OSP-U10L. Правила, функции, коды, команды, примеры программ.
При копировании материалов ссылка на сайт обязательна.